Skip to Content
ScopeLogik

The full assessment, step by step

Stage 2 in detail: from creating the assessment to delivering the report.

1. Create the assessment

Start from New first contact (Dashboard or Pipeline), or open an engagement already in stage 1. When the client agrees to a full assessment, use the Go ahead with an assessment? panel on its Process tab (see the assessment offer): it moves the engagement to Full assessment for you. These details are on the Overview tab:

  • Client: pick an existing client or enter a new one. The primary contact is the person you're working with, not necessarily someone you'll interview.
  • Goals: what the client wants out of this, in their words ("add 400 units without hiring", "cut month-end close from 8 days to 3"). The AI reads this when it analyzes interviews and drafts solutions, so be specific.
  • Client labor cost ($/hour): their blended, fully loaded cost per hour of staff time. Every savings figure is built on it. Ask the client, or use about 1.3 × average hourly wage.
  • Our bill rate ($/hour): what we charge. Quote line items are plan hours × this rate.

You can change all of this later on the Overview tab.

Want to see a finished example first? On a new account's Dashboard, click Load demo. It creates a complete assessment for a fictional property management company that you can explore, edit or delete.

2. Add stakeholders and send the intake questionnaire

Stakeholders tab. Add each person you'll interview: name, job title, department, email and phone.

Each stakeholder gets a private link to a 10-minute intake questionnaire: their role, where their time goes, the repetitive tasks they do (how often, how long, which tools, the steps), and what they'd change. No account or password is needed.

To send it:

  • Email it: sends the link from the app. Once sent, the button becomes Send reminder, and the card shows Intake sent with the date.
  • Email all: when several stakeholders haven't been sent their link yet, a bar at the top of the Stakeholders tab sends it to all of them at once. (Appears once email is set up and the stakeholder has an email address.)
  • Copy link: paste it into your own email or a message.
  • Preview: see exactly what they'll see.

When they submit, the card shows Intake received. The tasks they described appear on the Tasks tab marked From intake and Needs review.

Send the intake a few days before the interview. Their answers become your opening questions (next step).

3. Prepare for each interview

Interviews tab → Interview guide, or Interview prep on a stakeholder's card.

The guide is a script for a thorough interview of about 55 minutes in seven sections: opening, role and typical week, process walkthrough, pain points, systems and data, AI experience, and wrap-up. Each section says why it matters.

Choose a stakeholder at the top to turn it into a prep sheet. It adds:

  • Opening questions from their intake, quoting their own answers in the section where they belong ("Your biggest time sinks: …").
  • Tasks already documented for them, with what's still missing: how often, minutes per run, tools or steps.
  • Open follow-ups from earlier interviews with them.

Click Print / save as PDF to take it into the call.

The most important section is the process walkthrough. Savings and ROI are calculated from how often each task happens and how long it takes, so for every recurring process, ask for:

  • what starts it
  • each step, who does it and with which tool
  • minutes per run
  • times per month
  • what goes wrong

4. Run the interview and import it

Record the call with Fathom or Zoom. Afterwards, on the Interviews tab, under Import an interview:

  1. Paste the transcript and/or summary, or upload the export file (.txt, .vtt, .srt, .md or .json). Your own notes work too.
  2. Choose the Type: Discovery call for the first call (usually with whoever brought you in; see the assessment offer), Stakeholder interview for everyone after. Every call feeds the analysis; the type decides what else is recorded.
  3. Choose the stakeholder, or leave it on Detect from transcript.
  4. Leave Fill the assessment from this with AI ticked and click Import interview. It takes about a minute.

The AI then:

  • writes a summary and lists pain points, opportunities, notable quotes and the tools mentioned
  • adds anyone new from the client side as a stakeholder
  • documents each recurring task step by step on the Tasks tab. A task that matches one already on file gets this person's view added instead of a duplicate.
  • Second-hand tasks. A task described by someone who doesn't do it (the sponsor on the discovery call, or a manager) is marked Second-hand: verify. When the person who does it describes it, their steps and numbers replace the guess and the mark goes. You can also tick Verified with the people who do it on the task.
  • checks the interview against the guide (next step)

If the analysis fails, the transcript is still saved. Open the interview and click Analyze with AI to try again.

Second calls and follow-ups

  • Another call with the same person (part two, a callback to clarify): open their interview and use Add a follow-up session, or pick the interview in Add to on the import form. The transcript is added under a dated heading, the analysis re-runs over the whole conversation, and later sessions correct earlier ones. Tasks are updated, not duplicated.
  • A conversation with someone else, or a second discovery call with its own date: import it as a new interview. Every interview feeds the analysis.
  • A short emailed reply: paste it into the interview's notes box.

5. Check coverage and close the gaps

Open the interview. Interview coverage marks each guide section Covered, Partly covered or Missed, with a note on exactly what's missing. For example: "frequency given only per day, with no working days per month". The process walkthrough counts as covered only when every process has a frequency and minutes per run.

Follow-up questions lists what to ask to fill those gaps. Check them before sending: Edit questions shows the open ones one per line, so you can reword, delete or add questions (answered ones aren't affected). There are three ways to get answers:

OptionHowBest when
Email to [name]Emails the open questions with a link to answer online. They can also just reply. Becomes Send reminder after the first send.Most of the time
Copy answer linkThe same private link as their intake. It now shows the open questions first.You'd rather send it yourself
Replies and call notesPaste an emailed reply or notes from a quick call, then Save notes.Answers came back another way

Answers given through the link appear under each question with the date. When new answers arrive, the page says New answers since the last analysis.

Then click Re-run analysis. The AI reads the transcript together with the answers and notes. It fills in missing facts on tasks (frequency, minutes, people, tools) without overwriting anything you've edited, updates the coverage, and leaves only the questions still unanswered.

6. Review the tasks

Tasks tab. Every task from interviews and intakes is here. Open each one marked Needs review and check:

  • Times per month, Minutes each time and People involved. These drive the savings, so make sure they're realistic.
  • Steps: the current process in order. For each step, set who does it, the tool, the minutes, any pain point, and whether it Stays human, AI can assist or Can automate.
  • AI / automation fit: your 1–5 rating.
  • Notes: other stakeholders' views of the same task collect here.

Use Add task for anything nobody mentioned but you spotted. To save the task, click Save (this also clears Needs review).

7. Draft and approve solutions

Each task page has two tabs. Current state is how the work is done today (the details, numbers and steps). Solution summarizes the proposed solution, with Approve and Reject, and Open the solution workspace, where it's edited and built. If a task has no solution yet, draft one with AI there or write one yourself.

Solutions tab → Draft missing solutions with AI drafts one for every task without one. Or open a task and draft it there.

Each draft has: the approach (workflow automation, AI agent, AI assistant, integration, custom software or process change), a client-friendly summary, how it will work, the components, an implementation plan with hours, time saved %, monthly run cost, roadmap phase, risks and assumptions. The task page shows the results: Time saved, Net savings, Build cost and Payback.

Edit until it's right, then Approve it, or Reject it. Only approved solutions go into the quote and the client's report. Impact vs effort shows where each one lands, which helps you set the order.

Roadmap phase groups them for the client: quick win (inside 30 days), core (days 30–90) or later. Add a Prototype or demo link if you've built one.

Flow diagrams (optional)

Each solution on the Solutions tab has a Flow diagram section: a "Today" and a "With the solution" flowchart. They can show what the step list can't, such as decisions, hand-offs between people and which system each step happens in.

  • Start from the steps builds both from the task's documented steps. Automatic steps get a bold rounded box, and "AI drafts, a person approves" steps a dashed one.
  • Draft with AI writes them from the steps and the solution, with decisions and systems. It checks that everything the solution promises (routing, approvals, alerts such as "emergencies page the manager") is in the "after" flow.
  • Improve with AI (once there are flows) keeps your edits and adds what's missing. Redraft from the steps starts over.

Each solution card has three tabs: Overview, Flow and Build guide. The build guide (recommended tools, architecture and build steps) is described under Build.

  • Show code opens the Mermaid code with a live preview. If the code has an error you'll see it, and the last good drawing stays.
  • Tick Show in the client report and deck once you're happy. The report then shows both flows under the solution, the deck adds a slide for them, and the PDF includes them. They're off until you tick it.

8. Build the quote

Quote tab → Create quote from approved solutions. Each approved solution becomes a line item priced at plan hours × your bill rate.

  • Add line items for anything else: one-time, or Monthly (our fee) for your retainer or support.
  • Running costs: who pays the solutions' software, hosting and AI usage. The client pays the providers directly (the default) or We cover them: included in our monthly fee. See below.
  • Set a discount, terms and a Valid until date.
  • Draft introduction with AI writes the opening paragraph from the assessment.
  • Offer three options (good / better / best): assign each line item to the lowest option that includes it and mark one as recommended. The client picks one when accepting.
  • Approved a new solution later? Use Add as line items to bring it in.

Set Status to Sent when it's ready. The client can only see a sent quote.

Two kinds of monthly cost, kept apart. Clients see them separately everywhere: the proposal, the deck, the billing summary, the solution pages and the technical documentation.

What it isWho it's paid to
Our monthly feeYour retainer, support and monthly add-ons: the quote's monthly lines and monthly change ordersYou, on your invoices
Running costsEach solution's software subscriptions, hosting and AI usage (the solution's Running costs figure, an estimate)The providers, directly, on the client's own accounts, unless you cover them

By default the client pays running costs to the providers, separately from your invoices. If you pay them instead, set the quote's Running costs to We cover them: included in our monthly fee and make sure your monthly fee covers them (the quote warns you if it's lower). For each tool in a build guide or on the Build tab, Who pays it says the same thing per tool. Savings are always shown after running costs.

9. Deliver the report and presentation

Overview tab → Draft executive summary with AI, then edit it in Executive summary.

What they asked us to look into, and what we found. If the discovery call recorded what the client asked about, the Report & deck tab has a card to Draft with AI a comparison: for each problem they raised, a verdict (confirmed, partly, not the main issue, or not enough to say) and what you actually found, then what you found that they didn't ask about. Edit it there; it shows in the report right after the executive summary. This is often the most persuasive page in the report ("you called us about slow lead follow-up; the bigger cost is in order entry"). The executive summary draft also opens with what they came to you about.

Report & deck tab shows the client report: the executive summary, their own words, where the time goes, before and after process maps, savings as a conservative-to-best-case range, the impact-versus-effort chart, a phased roadmap and the proposal. The menu on the left shows it one section at a time: Summary, What we heard, Where the time goes, The opportunity, each solution, and the Proposal, with previous and next links at the bottom. Whole report shows it all on one page. The "what you asked vs what we found" editor sits above the Summary section.

  • Print / save as PDF for a document to send. It always prints the whole report, whichever section you're looking at. It opens with a cover page (your logo, the title, prepared for the client with their logo if you've added one, prepared by the engagement's owner, and the date). Each major section starts on a new page, each recommended solution gets its own page, and charts, tables and plans are never split. The browser's own date, URL and page-number lines are left off, and the PDF is named after the client and the report. Clients can print the same document from Download full report (PDF) in their workspace.
  • Open presentation for the readout meeting. Arrow keys move between slides, and printing gives one slide per page.
  • Create client share link gives the client their workspace (see The client workspace): the report in sections, the presentation, the proposal, and their progress, scope and change requests. They accept the proposal by typing their name. Open client workspace shows you what they see. Turn the link off from the Overview tab at any time.

Only approved solutions and a quote marked Sent appear on the share link.

On this page